SCY5 Series Split Core Hall effect Current Sensor

SCY5 Series Hall Current Sensor is a new generation Open loop Split core current sensor based on Hall effect principle, it could accurately measure DC, AC and pulse current and other various irregular waveforms current in electrical isolation conditions. Perforations in the form of a round hole type, use for cable connections, it is widely used in inverter, all kinds of power supply, DC panel, Welding machines and other equipments. Because the up and down could be open, this model is very easy for installation.


Technical Data:

Parameters @25 ℃/Model SCY5-
500A 800A 1000A 1200A 1500A 1800A
Nominal Rms Current (Ipn) ±500AT ±800AT ±1000AT ±1200AT ±1500AT ±1800AT
Primary current measuring range(Ipm) 1000AT 1600AT 2000AT 2400AT 3000AT 4000AT
Load resistance ≥10KΩ
Output Voltage ±4V or ±5V
Working Voltage DC ±12V or ±15V
Accuracy ±1%
Linearity ±1%
Withstand voltage 3kVrms/50Hz/1min
Zero output <30mV
Offset temperature characteristics: < ±0.1%/°C
Thermal drift of Vo <±1mV/°C (IF=0)
Hysteresis offset <±25mV (If=F.S. 0 <---> Rated input current)
Response time < 7uS
Bandwidth ±DC -4KHZ
Current consumption ±23mA
Operating temperature -20~+80 °C
Storage temperature -40~+85 °C



1. Size error: ±1mm;
2. Primary aperture: □64*16mm;
3. SCY5 output terminal: Molex 5045-04AG;
SCY5T output terminal: 2EDGVC-5.08-4P;
SCY5T mating plug: 2EDGK-5.08-4P;
4. The IP indication direction is the positive direction of the current, OFS is the zero adjustment, and GIN is the output regulation;
5. Incorrect wiring may cause damage to the sensor.


1. SCY5 Series’s up and down can open and close without removing the busbarline, easy to install.
2. Based on open-loop principle, it can measure DC, AC and Pulse current.
3. Square perforation, mainly measure copper conductor current.
4. Features: High accuracy, low power consumption, high liability and strongoverload capacity.
Caution: Incorrect wiring may damage the sensor

Shenzhen Socan Technologies Co.,Ltd


Address:4th Floor, A3 Bld, Xin Jian Xing Industrial Park, Feng Xing Rd, Guangming Street, Guangming New District, Shenzhen, China